Ferris Single Control Bathroom Faucet parts
9 part numbers on Pfister’s parts diagram. 8 in our catalog, the rest we order in.
Model numbers: LF-042-FERBLF-042-FERCLF-042-FERGS
Ferris Single Control Bathroom Faucet exploded diagram
Tap a part number to see the part, its price and fit. Blue parts are in our catalog; gray ones we order in.
972-097
Push & Seal Drain Assembly - No Logo in Polished Chrome
Verified fit On Pfister’s Ferris Single Control Bathroom Faucet parts diagram
Ferris Single Control Bathroom Faucet parts list
- 972-0977 finishes
Push & Seal Drain Assembly - No Logo in Polished Chrome
Verified fit On Pfister’s parts diagram for this model
$29.75 - 940-5983 finishes
Ferris Hdl W/dome Cap-set Scr- Wrnch 42 Fer Wrnch 42 Fer
Verified fit On Pfister’s parts diagram for this model
$34.85 - 972-0987 finishes
Push & Seal Drain Stopper without Logo in Polished Chrome
Verified fit On Pfister’s parts diagram for this model
$11.90 Verified fit On Pfister’s parts diagram for this model
$9.35Verified fit On Pfister’s parts diagram for this model
$20.40Verified fit On Pfister’s parts diagram for this model
Verified fit On Pfister’s parts diagram for this model
$11.90Lcknut And Wsher Psh-seal Ver2
Verified fit On Pfister’s parts diagram for this model
$9.35Verified fit On Pfister’s parts diagram for this model
$7.65
About the Pfister Ferris Single Control Bathroom Faucet
The Ferris faucet displays a modern but soft design by projecting curves into the typical sleek, hard-edge motif of modern aesthetics. The precise aesthetic is defined by clean, horizontal lines while the contrasting subtle curves offer balance. The footprint of Ferris is subtle and combined with the thin profile of the spout this faucet may be the perfect design for most modern spaces.
- Meets ADA/ANSI A117.1 requirements, ensuring accessibility to all disabled persons
- Pforever Seal™ features an advanced ceramic disc valve technology with a never-leak guarantee
- Complies with Federal and State safe drinking water legislation.
- Meets or exceeds EPA WaterSense Standards, which reduces water consumption by 30% and helps average households save up to $200 in their annual water bill
- TiteSeal™ Mounting Technology eliminates the need for putty or silicone and simplifies installation
- Includes valve and cartridge
- Includes decorative deck plate
- Push & Seal™ drain requires no tools and installs in less than half the time of a standard pop-up drain, Guaranteed tight seal each and every use - simply press to seal and again to open
- Rated to meet or exceed CALGreen criteria, which helps to conserve water in the average home by at least 20 percent
- Push & Seal Drain®
| GPM Flow Rate | 1.2 |
|---|---|
| # of Handles | 1 |
| Total Spout Height | 4-1/4 |
| Deck To Aerator Height | 3-7/16 |
| Deckplate Included | Yes |
| Drain Assembly | American Push & Seal |
| Max Deck Thickness | 3 |
| Configurations | 1-Hole 3-Hole |
Ferris Single Control Bathroom Faucet parts questions
What cartridge does the Pfister Ferris Single Control Bathroom Faucet (LF-042-FERB) use?
Pfister's parts diagram for the LF-042-FERB lists 962-075 (Cartridge Retainer Nut), 974-074 (Ceramic Disc Cartridge).
How many replacement parts are on the LF-042-FERB diagram?
Pfister's parts diagram for the Ferris Single Control Bathroom Faucet shows 9 part numbers, including trim and hardware. Tap any part on our interactive diagram to see price and finish.
Which model numbers are covered on this page?
LF-042-FERB, LF-042-FERC, LF-042-FERGS. The letters at the end of a Pfister model number are the finish.